 |
 |
 |
 |
|
Product Detail |
 |
|
For a truly professional microphone that provides excellent sound and build quality with low handling noise, many vocalists look to the AE3300 from Audio-Technica. The AE3300 features the same element as the high-end AT4033 studio condenser microphone, but the rest of it is all built specifically for live use. The goal is to bring a clean, studio sounding vocal to the stage and the AT3300 hits it right on the money.
- Exceptional performance for exceptional performers
- Same element as the classic AT4033 studio microphone
- Well-tempered polar pattern with outstanding rejection qualities
- Superior anti-shock engineering ensures low handling noise and quiet performance
- High-quality double-sided PCB uses surface-mount components. Extensive grounding plane and attention to best-practice grounding methods minimize electrical noise
- Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
- Multi-stage grille design offers excellent protection against plosives and sibilance without compromising high-frequency clarity
- Robust all-metal design for enduring dependability on the road
- Quiet-Flex™ stand clamp provides silent, flexible microphone positioning
- Integral 80 Hz HPF switch and 10 dB pad
- ELEMENT Fixed-charge back plate, permanently polarized condenser
- POLAR PATTERN Cardioid
- FREQUENCY RESPONSE 30-18,000 Hz
- LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave
- OPEN CIRCUIT SENSITIVITY -42 dB (7.9 mV) re 1V at 1 Pa
- IMPEDANCE 150 ohms
- MAXIMUM INPUT SOUND LEVEL 147 dB SPL, 1 kHz at 1% T.H.D.;
- 157 dB SPL, with 10 dB pad (nominal)
- NOISE 19 dB SPL
- DYNAMIC RANGE (typical) 128 dB, 1 kHz at Max SPL
- SIGNAL-TO-NOISE RATIO 75 dB, 1 kHz at 1 Pa
- PHANTOM POWER REQUIREMENTS 11-52V DC, 3 mA typical
- SWITCHES High-pass filter;
- 10 dB pad (nominal)
- WEIGHT 10.6 oz (300 g)
- DIMENSIONS 7.05" (179.0 mm) long,
- 1.97" (50.0 mm) head diameter,
- 1.30" to 0.87" (33.0 mm to 22.0 mm) tapered body diameter
- OUTPUT CONNECTOR Integral 3-pin XLRM-type
- ACCESSORIES FURNISHED AT8470 Quiet-Flex™ stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
- AUDIO-TECHNICA CASE STYLE T4
|
|
 |
 |
|
|
|
 |
 |
 |
