 |
 |
 |
 |
|
Product Detail |
 |
|
The Audio Technica 2041 is a studio condenser microphone engineered specifically for handling bright, articulate sounds smoothly. It can easily capture the crispness and wash of quality cymbals just as well as the true voice of an acoustic guitar, acoustic piano or even under the high sound pressure level abuse of horns or snare drums. It also features a switchable hi-pass filter for on-the-fly adjustments.
- Smooth, extended frequency response with a slight rise occurring in the high-frequency region
- Ideal for drum overheads, acoustic guitar, piano, horns and under snare
- Low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer
- Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
- Switchable hi-pass filter and rugged turned-brass microphone housing
- ELEMENT Fixed-charge back plate, permanently polarized condenser
- POLAR PATTERN Cardioid
- FREQUENCY RESPONSE 20-20,000 Hz
- LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave
- OPEN CIRCUIT SENSITIVITY -36 dB (15.8 mV), re 1V at 1 Pa
- IMPEDANCE 100 ohms
- MAXIMUM INPUT SOUND LEVEL 145 dB SPL, 1 kHz at 1% T.H.D.
- DYNAMIC RANGE (typical) 121 dB, 1 kHz at Max SPL
- SIGNAL-TO-NOISE RATIO 70 dB, 1 kHz at 1 Pa
- PHANTOM POWER REQUIREMENTS 48V DC, 3.2 mA typical
- SWITCH Flat, roll-off
- WEIGHT 4.2 oz (120 g)
- DIMENSIONS 6.28" (159.5 mm) long,
0.83" (21.0 mm) body diameter
- OUTPUT CONNECTOR Integral 3-pin XLRM-type
- ACCESSORIES FURNISHED AT8405a stand clamp for 5/8"-27 threaded stands; AT8159 windscreen; protective carrying case
- AUDIO-TECHNICA CASE STYLE S1
|
|
 |
 |
|
|
|
 |
 |
 |
