 |
 |
 |
 |
|
Product Detail |
 |
- Maximum intelligibility and clean, accurate reproduction for
lecturers, stage and television talent, and houses of worship
- Low-profile design (a mere 5 mm in diameter) is ideal for
applications requiring minimum visibility
- Operates on battery or phantom power
- Extensive array of provided accessories includes a clothing clip,
viper clip, magnet clip and lanyard (black models only), windscreens,
interchangeable single and double mic holders
- Accessories available separately
- 9.8 (3.0 m) cable permanently attached to mic, TA3F connector at
power module
- Also available as:
AT898c -- less power module; 55" (1.4 m) cable, unterminated
AT898cL4 -- less power module; 55" (1.4 m) cable terminated
with Lemo connector for Sennheiser SK wireless systems
AT898cT4 -- less power module; 55" (1.4 m) cable terminated
with TA4F connector for Shure wireless systems
AT898cT5 -- less power module; 55" (1.4 m) cable terminated
with TA5F connector for ATW-U101 body-pack wireless system
AT898cW -- less power module; 55" (1.4 m) cable terminated with
locking 4-pin connector for A-T UniPak™ wireless systems
|
|
| |
| AT898 Specifications |
| Element |
|
Phantom Power Requirements |
| |
Condenser
|
|
11-52V, 2 mA typical
|
| Polar Pattern |
Battery Type |
| |
Cardioid
|
|
1.5V AA/UM3
|
| Frequency Response |
Battery Current/Life |
| |
200 - 15,000 Hz
|
|
0.4 mA/1200 hours typical
|
| Open Circuit Sensitivity |
Switch |
| |
PHANTOM: -43 dB (7.0 mV) re 1V at 1 Pa
BATTERY: -46 dB (5.0 mV) re 1V at 1 Pa
|
|
Flat/Roll-off
|
| Impedance |
Low Frequency Roll-off |
| |
PHANTOM: 200 ohms
BATTERY: 250 ohms
|
|
80 Hz, 12 dB per octave
|
| Maximum Input Sound Level |
Weight |
| |
PHANTOM: 131 dB SPL, 1 kHz at 1% T.H.D.
BATTERY: 115 dB SPL, 1 kHz at 1% T.H.D.
|
|
0.03 oz (0.9 g)
|
| Signal to Noise Ratio |
Power Module |
| |
63 dB, 1 kHz at 1 Pa
|
|
In-line
|
| Dynamic Range (Typical) |
Output Connector |
| |
PHANTOM: 100 dB, 1 kHz at Max. SPL
BATTERY: 84 dB, 1 kHz at Max. SPL
|
|
XLRM-type (power module)
|
|
| Accessories Furnished:
|
AT8537 power module; AT8439 cable clip;
clothing clip base; viper clip base; magnet clip base with plate and
lanyard; three single mic holders; two double mic holders; two
windscreens; battery; protective case |
|
|
|
 |
 |
|
|
|
 |
 |
 |
