 |
 |
 |
 |
|
Product Detail |
 |
- Transparent uppers/mids balanced by rich low-end qualities combine
with advanced acoustic engineering for extensive performance
capabilities and highest quality
- Dual-diaphragm capsule design maintains precise polar pattern
definition across the full frequency range of the microphone
- The 2-micron-thick, vapor-deposited gold diaphragms undergo a
five-step aging process so that the optimum characteristics achieved
remain constant over years of use
- Three switchable polar patterns: omni, cardioid, figure-of-eight
- Transformerless circuitry virtually eliminates low-frequency
distortion and provides superior correlation of high-speed transients
- State-of-the-art surface-mount electronics ensure compliance with
A-T s stringent consistency and reliability standards
- Switchable 80 Hz hi-pass filter and 10 dB pad
- Includes AT8449 shock mount
|
|
| AT4050 Specifications |
| Element |
|
Dynamic Range (Typical) |
| |
Condenser
|
|
132 dB, 1 kHz at Max. SPL
|
| Polar Pattern |
Phantom Power Requirements |
| |
Cardioid, Omni, Figure-of-eight
|
|
48V (±4V)
|
| Frequency Response |
Switches |
| |
20 - 18,000 Hz
|
|
Polar pattern; 10 dB pad; roll-off
|
| Open Circuit Sensitivity |
Low Frequency Roll-off |
| |
-36 dB (15.8 mV), re 1V at 1 Pa
|
|
80 Hz, 12 dB per octave
|
| Impedance |
Weight |
| |
100 ohms
|
|
18.0 oz (510 g)
|
| Maximum Input Sound Level |
Output Connector |
| |
149 dB SPL, 1 kHz at 1% T.H.D.
|
|
XLRM-type
|
| Signal to Noise Ratio |
|
| |
77 dB, 1 kHz at 1 Pa
|
|
|
|
| Accessories Furnished:
|
AT8449 shock mount; microphone dust
cover; protective case |
|
|
|
 |
 |
|
|
|
 |
 |
 |
