The white-finished version of the U851R, the
phantom-powered U851RW features a PivotPoint™ rotating output connector,
UniSteep® filter and UniGuard™ RFI-shielding technology. Offering outstanding
speech intelligibility and transparent sound quality for surface-mount
applications, the U851RW accepts interchangeable condenser elements—available
for boundary microphones in cardioid, hypercardioid and omnidirectional polar
patterns. With a heavy die-cast case and silicon foam bottom pads to minimize
coupling of surface vibration to the microphone, the U851RW is equipped with
self-contained electronics, eliminating the need for an external power module.
* Designed for surface-mount applications such as high-quality sound
reinforcement, professional recording, television, conferencing and other
demanding sound pickup situations
* PivotPoint™ rotating output connector allows cable to exit from either the
rear or the bottom of the microphone
* Superior off-axis rejection for maximum gain before feedback
* UniGuard™ RFI-shielding technology offers outstanding rejection of radio
frequency interference (RFI)
* Self-contained electronics eliminate need for external power module
* Small-diameter UniPoint capsule near boundary eliminates phase distortion and
delivers clear, high-output performance
* Heavy die-cast case and non-slip silicon foam bottom pads minimize coupling of
surface vibration to the microphone
* Low-profile design with low-reflectance finish for minimum visibility
* Available in two colors: black (U851R) and white (U851RW)
SPECIFICATIONS
ELEMENT Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN Half-cardioid
(cardioid in hemisphere above mounting surface)
FREQUENCY RESPONSE 30-20,000 Hz
LOW FREQUENCY ROLL-OFF 80 Hz, 18 dB/octave
OPEN CIRCUIT SENSITIVITY –34 dB (19.9 mV) re 1V at 1 Pa
IMPEDANCE 200 ohms
MAXIMUM INPUT SOUND LEVEL 134 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical) 108 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO 68 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS 11-52V DC, 4 mA typical
SWITCH Flat, roll-off
WEIGHT 9.2 oz (262 g)
DIMENSIONS 4.25" (108.0 mm) long,
3.31" (84.0 mm) maximum width,
0.91" (23.0 mm) height
OUTPUT CONNECTOR TB3M-type
CABLE 25.0 (7.6 m) long, 0.13" (3.2 mm) diameter, 2-conductor, shielded cable
with TA3F and XLRM-type connectors
OPTIONAL INTERCHANGEABLE ELEMENTS UE-H hypercardioid (100°);
UE-O omnidirectional (360°)
ACCESSORY FURNISHED Soft protective pouch
