Finally
Finally, all the essentials in one tough little
box, You need a serious D.I. for playing live and laying down killer tracks.
You`ve got to have a preamp and finely tuned EQ to add punch to your tones. And
you definitely can`t do without some rich, custom distortion. This one-of-a-kind
pedal gives you the whole deal in a bomb-proof enclosure that will survive even
the most out of control gigs-and players.
Built with the highest quality components, the M-80 can give you everything from
warmth and transparency to a volcanic roar, without making you scroll through
menu screens or an indecipherable manual. Engage the color switch for some sweet
preset EQ, then tweak your tone with three band control. Dial in your ideal
distortion with the gain knob and blend just the right amount into your clean
signal, then kick it on and off at will. The adjustable noise gate pours on the
sustain and cuts out hum and hiss. With XLR and parallel 1/4" outputs and a
phantom power switch, you`ll never have a problem delivering your choice new
tones.
Features:
Controls: Effect Footswitch toggles Effects
on/Bypass (red LED Indicates on) Distortion Footswitch toggles Distortion
channel in/out (Distortion LED indicates Distortion level active)
Bass/Mid/Treb EQ knobs allow Clean and
Distortion tone fine-tuning Color switch activates a pre-set EQ optimized for
bass Clean Volume knob adjusts output level of Clean channel (Effect footswitch
on and Distortion footswitch off)
The following knobs are only active when Distortion channel is selected:
Distortion Volume knob adjusts overall output
level
Blend knob controls the mix between
distorted/clean signal
Gate Trigger knob sets the noise floor
threshold, or sensitivity, of the Noise Gate Gate switch selects Noise Gate
In/Out Gain knob sets distortion level
Phantom/Ground switch selects between Direct
Output Ground Lift (switch up) and Phantom Power (switch depressed)
