Attack. The frequency response and cardioid pick-up pattern are optimized for drum sets
and other percussion instrument miking, while also producing exceptional results on all forms of brass and woodwind. An integral stand mount screws directly onto mic stands and included clip attaches mic to rim of drum.
Very high sound pressure
level handling, in excess of 160 dB, is combined with a balanced, clear, low
distortion signal similar to a high-end studio condenser microphone.
Lightweight voice coil provides extended high frequency and rapid transient
response. A tough reinforced glass fiber body takes the knocks and shocks and
suppresses impact noise.
| Pickup
pattern |
Cardioid |
|
Transducer principle |
Pressure
gradient receiver |
| Frequency
response |
40Hz -
18kHz |
|
Sensitivity (free field, no load) 1kHz |
1mV/Pa
=/- 55 dB (odB=1V/Pa) =/-75dB (odB=1V/µbar) (USA) |
| Nominal
impedance at 1 kHz |
350 ohms |
| Min
terminating impedance |
1000 ohms |
|
Dimensions |
Ø=1.3 in.
L=2.3 in. |
| Weight |
2.1 oz. |
