The P2TRE2 wireless personal monitor system with mix control consists of the P2T Wireless Transmixer, the P2R Hybrid Bodypack Reciever, and the E2 Dynamic Driver Earphones.
P2T Wireless TransMixer
x The P2T TransMixer is breakthrough design for in-ear monitoring. It allows the user to connect two Line-Level or miclevel inputs directly into the transmitter. The two signals can then be mixed independently. You can connect microphones or instruments directly to the inputs, use line outputs from a mixing console, or connect it to Shure's AuxPander. In short, no matter what the output device, you can probably plug it into the TransMixer.
Features:
- Built-in audio Limiter
- Front mounted Antenna
- Two Mic/line input channels for mix control
- 1/2 Rack space
Operating Controls:
- Input level control
- Frequency select
LED Indicators:
- Tri-color input level
- Frequency
Inputs:
- Two Mic/line, XLR-1/4 in. combo input channels
Outputs:
P2R Hybrid Bodypack Receiver
The P2R Receiver is the world's first bodypack receiver to function as a wired receiver, a wireless receiver, or both at the same time. This and other unique features, along with excellent sound quality, make the P2R an exceptional value.
Features:
- Can operate as a wired or wireless bodypack, or both simulaneously
- Frequency locator
- Built-in headphone Limiter
- Integrated cable management
- High-impact plastic chassis
- 1/4" Line inpit Jack with high/low Gain switch
Operating Controls:
- Volume knob
- Frequency select
LED Indicators:
- Power
- RF reception
- Frequency
- Limiter
- Low Battery
E2 Dynamic Driver Earphones
Single high energy drivers deliver full range sound and isolation from outside noise.
Specifications:
- Transducer Type: Dynamic high energy
- Sensitivity (at 1 kHz): 105 dB SPL/mW
- Impedance (at 1 kHz) 16 Ohms
- Output Connector: Gold-plated Stereo, 3.5 mm (1/8-inch) phone plug
- Cable Length: 1.57 m (62 inches)
