A winning combination of superior sound quality, convenient mixing control, and reliability has made the Yamaha EMX Series the top choice for bands, personal studios, houses of worship, corporate and educational facilities. Compact packages, versatile input capabilities, plentiful power and top-quality, built-in signal processing are standard equipment. Yamaha brings a new member to its EMX family with the Winter NAMM introduction of the EMX5014C.
Like others in the EMX family, the EMX5014C is a fully integrated mixer offering a range of features to mix, process, and deliver your sound with maximum quality and creative control. Equipped with ultra lightweight amplifier circuits, power is the priority of the 500-watt per channel multi-mode stereo power section.
A total of 14 input channels accommodate mics, instruments and playback gear with a selection of mono mic/line and stereo line inputs. Connections include XLR, TRS 1/4-in. phone, and RCA. A power mode switch allows the two amplifier channels to be used with the stereo outputs, drive main speakers and separate monitor mixes, while power amp mode selector switches allow the user to configure the amp channels to suit a range of applications.
MIX, PROCESS AND DELIVER WITH THE EMX5014C
For sound shaping and feedback control, the EMX5014C includes 3-band EQ on each input channel, a stereo 9-band graphic EQ on the main stereo output, and a separate graphic for the monitor output. Each channel also contains a Feedback Channel Locator (FCL) indicator that pinpoints the input channel creating the problem. Additionally, channels 1 thru 6 provide single knob compressors. This Yamaha exclusive feature is great for controlling unruly vocals or tightening up a bass guitar.
Onboard signal processing includes a selection of 16 professional-grade programs (reverb, echo, chorus, flanger, phaser, drum ambiance and distortion) from Yamaha s renowned SPX series processor products. In addition, onboard proprietary YSProcessing tailors the signal for optimum use with Yamaha s Club Series loudspeakers.
|
Model |
EMX512SC |
EMX312SC |
EMX212S |
Maximum output power
1kHz, THD+N¡Ü0.5% |
4ohms |
500W+500W |
300W+300W |
220W+220W |
8ohms/AC120V model
8ohms/AC220-240V model |
350W+350W
320W+320W
|
190W+190W
180W+180W
|
130W+130W
130W+130W
|
|
Total harmonic distortion |
Less than 0.5%, +14dBu@ 20Hz-20kHz |
Frequency response
|
0, -3, +1dB, 20Hz-20kHz, 0dB@1kHz |
Equivalent input noise
20Hz-20kHz |
-115dBu |
|
Crosstalk/1kHz |
-65dB |
|
Phantom voltage |
+15V, CH1-4:INPUT B, CH5/6-11/12:MIC |
CH&ST CH equalizer
¡À15dB maximum |
HIGH |
10kHz (Shelving) |
|
MID |
2.5kHz (Peaking) |
|
LOW |
100Hz (Shelving) |
|
Effect |
16 program, Parameter control |
|
FOOT SW (ON/OFF) |
|
Levelmeter |
2x5 point LEDlevel meter[MAIN(L,R)]
5 point LED level meter [MONITOR] |
|
FCL Sensitivity |
Input signal level¡Ý-75dBu: LED on
CH1-4 MIC/LINE:MIC B Input, CH5/6-11/12 MIC Input |
|
Protection |
Power Amplifier |
POWER switch on/off mute
DC-fault
Thermal / heatsink temp¡Ý90degrees celsius
VI limiter / RL¡Ü2ohms
Clip limiter / THD¡Ý1%, Indicator x 2
|
|
Power supply |
Thermal / heatsink temp¡Ý100degrees celsius |
|
Power consumption |
550W |
450W |
350W |
|
Dimensions |
W |
442.5mm |
|
H |
284mm |
|
D |
264mm |
|
Weight |
8kg |
|
Input terminal |
MIC/LINE |
Actual load impedance |
For use with nominal |
Input level |
Connector |
|
Sensitivity |
Nominal |
Max. before clip |
|
CH INPUT 1-4 |
XLR |
MIC |
2kohms |
50-600 ohm Mics |
-60dBu |
-35dBu |
-15dBu |
XLR3-31 type |
|
LINE |
-30dBu |
-5dBu |
+15dBu |
|
Phone |
MIC |
6kohms |
600ohm Lines |
-50dBu |
-25dBu |
-5dBu |
TRS phone jack |
|
LINE |
-20dBu |
+5dBu |
+25dBu |
|
CH INPUT 5/6,7/8 |
XLR |
- |
2kohms |
50-600 ohm Mics |
-60dBu |
-35dBu |
-15dBu |
XLR3-31 type |
|
Phone |
- |
10kohms |
600ohm Lines |
-20dBu |
+5dBu |
+25dBu |
Phone jack |
|
CH INPUT 9/10,11/12 |
XLR |
- |
2kohms |
50-600 ohm Mics |
-60dBu |
-35dBu |
-15dBu |
XLR3-31 type |
|
Pin |
- |
10kohms |
600ohm Lines |
-20dBu |
+5dBu |
+25dBu |
RCA pin jack |
|
Output terminal |
Actual source impedance |
For use with nominal |
Output level |
Connector |
|
Model |
Nominal |
Max. before clip |
|
SPEAKERS [A1,A2,B1,B2] |
0.1ohms |
4ohm Speakers |
EMX512SC |
125W |
500W |
[A1,B1]SPEAKON
[A2,B2]Phone jack |
|
EMX312SC |
75W |
300W |
|
EMX212S |
50W |
200W |
|
MAIN OUT[L,R] |
600ohms |
10kohm Lines |
- |
+4dBu |
+20dBu |
Phone jack |
|
EFFECT OUT |
600ohms |
10kohm Lines |
- |
+4dBu |
+20dBu |
Phone jack |
|
MONITOR OUT |
600ohms |
10kohm Lines |
- |
+4dBu |
+20dBu |
Phone jack |
|
REC OUT[L,R] |
600ohms |
10kohm Lines |
- |
-10dBu |
+10dBu |
RCA pin jack |
