This Fender Phaser Effect Pedal from the Classics Series adds versatility
to your sound with a few easy knobs
This Fender Phaser Effect
Pedal from the Classics Series adds versatility to your sound with a few easy
knobs. Rate This knob controls the rate at which the phase shifting occurs. The
rate control knob alternately illuminates blue and red at the same rate as the
phase shifting.
Intensity This knob adjusts the intensity of the Phasing effect.
Frequency This knob adjusts what frequencies are affected by the phasing action.
Fully counter-clockwise causes the bass frequencies to be affected most by the
phasing action, fully clockwise causes the treble frequencies to be most
affected by the phasing action.
Bypass Switch A true-bypass" of the phaser effect. Turns the phasing effect
on-off.
Output Jack Connect to the input of your amplifier (or other audio device).
Input jack Plug your guitar (or other audio source) in here. Unplug the input
plug from this jack to turn off the device and save power (very important) when
not in use.
DC Input Jack Plug in a AC- 9V DC adaptor (see specifications) into this jack to
eliminate the need for batteries.
Fender
Classics Series Phaser Pedal Specifications:
- Input Impedance: 470kOhm
- Nominal Input Level: 20dBV
- Output Impedance: 4.7kOhm
- Nominal Output Level: 20dBV
- Recommended Load Impedance: 50kOhm or
Greater
- Power Requirements: 9VDC (Center Pin =
Negative); 40mA Minimum
