- Designed for sax, toms, brass and percussion, the PRO 35ax excels
in high-SPL applications and is ideal for active stage performances
- UniMount® clip permits accurate positioning, provides shock
resistance and protects element
- Cardioid polar pattern reduces pickup of sounds from the sides and
rear, improving isolation of desired sound source
- Extended frequency response captures subtle nuances of the
performance
- 6' (1.8 m) cable permanently attached between microphone and power
module
|
|
| PRO 35ax Specifications
|
| Element |
|
Dynamic Range (Typical) |
| |
Condenser
|
|
115 dB, 1 kHz at Max. SPL
|
| Polar Pattern |
Phantom Power Requirements |
| |
Cardioid
|
|
11 - 52V, 4 mA typical
|
| Frequency Response |
Switch |
| |
50 - 15,000 Hz
|
|
Flat/roll-off
|
| Open Circuit Sensitivity |
Low Frequency Roll-off |
| |
-45 dB (5.6 mV) re 1V at 1 Pa
|
|
80 Hz, 12 dB per octave
|
| Impedance |
Weight |
| |
250 ohms
|
|
0.3 oz (8 g)
|
| Maximum Input Sound Level |
Power Module |
| |
145 dB SPL, 1 kHz at 1% T.H.D.
|
|
In-line
|
| Signal to Noise Ratio |
Output Connector |
| |
64 dB, 1 kHz at 1 Pa
|
|
XLRM-type (power module)
|
|
| Accessories Furnished:
|
AT8418 UniMount® instrument mount;
AT8536 power module; protective pouch |
|
|
