- Wide-range condenser element with low-mass diaphragm for superior
performance
- Self-contained electronics eliminate need for external power
modules
- Flat, smooth frequency response
- Quiet, fixed-placement, long-life gooseneck
- Direct mounts to any 5/8"-27 stand, or to included threaded
mounting stud
- 9.8' (3.0 m) cable permanently attached between microphone and
XLRM-type connector
- Overall length of 12.40" (315.0 mm)
- Also available in a 15.79" (401.0 mm)-long version as PRO 47TL
|
|
| PRO 47T Specifications |
| Element |
|
Signal to Noise Ratio |
| |
Condenser
|
|
66 dB, 1 kHz at 1 Pa
|
| Polar Pattern |
Dynamic Range (Typical) |
| |
Cardioid
|
|
106 dB, 1 kHz at Max. SPL
|
| Frequency Response |
Phantom Power Requirements |
| |
70 - 16,000 Hz
|
|
9 - 52V, 2 mA typical
|
| Open Circuit Sensitivity |
Weight |
| |
-37 dB (14.1 mV) re 1V at 1 Pa
|
|
2.2 oz (63 g)
|
| Impedance |
Power Module |
| |
100 ohms
|
|
Integral
|
| Maximum Input Sound Level |
Output Connector |
| |
134 dB SPL, 1 kHz at 1% T.H.D.
|
|
XLRM-type on cable
|
|
| Accessories Furnished:
|
AT8146 foam windscreen; AT8425 threaded
mounting stud |
|
|
