- Smooth, extended frequency response with a slight rise occurring
in the high-frequency region
- Ideal for drum overheads, acoustic guitar, piano, horns and under
snare
- Low-mass diaphragm improves transient response, increases response
bandwidth and reduces handling and mechanical noise transfer
- Transformerless circuitry virtually eliminates low-frequency
distortion and provides superior correlation of high-speed transients
- State-of-the-art design and manufacturing techniques ensure
compliance with A-T's stringent consistency and reliability standards
- Switchable hi-pass filter and rugged turned-brass microphone
housing
|
|
| AT4041 Specifications |
| Element |
|
Dynamic Range (Typical) |
| |
Condenser
|
|
121 dB, 1 kHz at Max. SPL
|
| Polar Pattern |
Phantom Power Requirements |
| |
Cardioid
|
|
48V (±4V)
|
| Frequency Response |
Switch |
| |
20 - 20,000 Hz
|
|
Flat/roll-off
|
| Open Circuit Sensitivity |
Low Frequency Roll-off |
| |
-36 dB (15.8 mV), re 1V at 1 Pa
|
|
80 Hz, 12 dB per octave
|
| Impedance |
Weight |
| |
100 ohms
|
|
4.2 oz (120 g)
|
| Maximum Input Sound Level |
Output Connector |
| |
145 dB SPL, 1 kHz at 1% T.H.D.
|
|
XLRM-type
|
| Signal to Noise Ratio |
|
| |
70 dB, 1 kHz at 1 Pa
|
|
|
|
| Accessories Furnished:
|
AT8405 stand clamp; foam windscreen;
protective case |
|
|
