The revolutionary new SL Series mixing consoles for the first time unite
studio perfection with live performance in one single mixer. They are loaded
with top-notch, no-compromise technology like studio-grade acoustically
“Invisible” IMP Mic Preamps, ULN (Ultra Low-Noise) circuitry, dual 24-bit FX
processors of VIRTUALIZER fame and the amazing new FBQ Feedback Detection
System.
For the studio there are two high-end 24-bit FX processors, incredible
connectivity, an integrated talkback section plus comprehensive solo-in-place
and pre-fader-listen functions. For live performances, they feature an
ultra-musical 9-band stereo graphic EQ with the amazing FBQ Feedback Detection
System and even a mono subwoofer output with a sweepable low pass filter.
Another nice touch for live gigs: all mic channels can be muted during breaks by
pressing a single button, so music can be played via CD/tape inputs without the
mics picking up any sounds.
The SL2442FX-PRO is the new compact SL Series mixing console with 24 channels
(16 mono plus 4 stereo). It features 4 subgroups and 4 pre/post switchable aux
sends per channel, 3-band EQs with semi-parametric mids and low cut filters for
the mono channels, full-fledged high-headroom stereo input channels with 4-band
equalization plus additional stereo input channels with level and pre-fader aux
facilities.
One for the Road SL consoles are built with a super-sturdy metal cabinet that
will withstand even the most punishing tour conditions. They use our built-in,
oversized state-of-the-art auto-range power supply that automatically adapts to
mains voltages (from 100 to 240 Volts) wherever you go and is immune to
fluctuating mains voltages and spikes that you’ll find at most live venues.
Plus, due to its high efficiency, it consumes much less energy than a
conventional power supply so it runs a lot cooler.
|
Ultra low-noise ULN design, highest possible headroom, ultra-transparent
audio
|
|
16 new state-of-the-art, studio-grade IMP “Invisible” Mic Preamps with:
-
130 dB dynamic range for 24-bit, 192 kHz sampling rate inputs
-
Ultra-wide 60 dB gain range
-
Lowest possible distortion 0.0007% (20 Hz - 20 kHz)
|
|
2 independent 24-bit digital stereo FX processors with 99 great-sounding
VIRTUALIZER presets including reverb, delay, chorus, compressor, tube
distortion and more
|
|
High precision 9-band stereo graphic EQ allows precise frequency
correction of monitor or main mixes
|
|
Revolutionary, patent-pending FBQ Feedback Detection System instantly
reveals critical frequencies
|
|
2 fully featured stereo input channels with 4-band EQ plus 2 additional
stereo input channels with level and pre-fader aux facilities
|
|
Effective, extremely musical 3-band EQ plus switchable low cut filter on
all mono channels
|
|
Inserts on each mono channel and main mix for flexible connection of
outboard equipment
|
|
4 subgroups and additional mono output with sweepable low pass filter for
subwoofer application
|
|
4 aux sends per channel: 2 switchable pre/post fader, 2 post fader (for
internal FX and/or as external send)
|
|
Clip indication and gain level set LEDs plus mute switches for each
channel allow fast and accurate level setting
|
|
Balanced main mix outputs with gold-plated XLR and ¼” TRS connectors,
headphone/control room output and stereo tape outputs
|
|
Solo-In-Place and Pre-Fader-Listen functions plus full-featured talkback
section
|
|
Standby switch mutes all channels during breaks while background music is
provided via CD/tape inputs
|
|
State-of-the-art 4580 operational amplifiers provide lowest noise and
distortion—better than 4560 op amps
|
|
Long-wearing logarithmic-taper ALPS® faders and sealed rotary controls
|
|
Internal switch-mode power supply for maximum flexibility (100 - 240 V~),
noise-free audio, superior transient response plus lowest possible power
consumption
|
|
Extremely rugged construction ensures long life even under most demanding
conditions
|
|
Designed in Germany. Manufactured under ISO9000 certified management
system
|
|
