Output Power:
2 ohms, 1 khz 1% THD 2530W RMS per channel
4 ohms, 1 khz 1% THD 1920W RMS per channel
8 ohms, 1 khz 1% THD 1260W RMS per channel
(Bridged Mode, mono)
4 ohms, 1 khz 1% THD 5100W RMS per channel
8 ohms, 1 khz 1% THD 3650W RMS per channel
Total Harmonic Distortion (THD):
Less than 0.03% (20Hz-20kHz, @ 4 Ohms)
Input Sensitivity & Impedance:
1.0v rms (0 dBv) (@ 8 Ohms)
Dimensions & Weight:
Height : 5.25” (13.3cm)
Width: 19” (48.3cm)
Depth: 15.9” (40.5cm)
Weight: 62 lbs (28 kg)
Frequency Response:
±.5dB, 1W RMS 8 ohms (10Hz - 35 kHz)
±3dB, 1W RMS 8 ohms (5Hz - 85 kHz)
Hum & Noise:
100 dB, unweighted (@ 8 Ohms)
Signal to Noise Ratio:
100 dB , unweighted (@ 4 ohms full power) “A” Weighted
Slew Rate:
25v/usec
Damping Factor:
500 (@ 8 Ohms)
Protection Circuit:
DC output protection, Overload protection
Short circuit protection, On & Off protection
Special Features:
Sub Woofer
Crossover 20-200Hz
LED mode indicator
Contractor Smart™ Feature (Switch on rear panel to disable front volume controls)
Power Consumption:
53A @ 120V AC (@ 4 Ohms) / 25.5A @ 240V AC (@ 4 Ohms)
Turn-On Thump Protection:
Yes
Cooling System:
Dual 2 speed fans & heatsink
