EON15P-1Powered Speaker
System
Application:
Live sound reinforcement, speech, vocals, and
music playback in entertainment, A/V, and
institutional venues – especially when ease of
use, audio quality and portability are important
factors.
Key Features:
- 15" Differential Drive® low-frequency driver
with neodymium magnet for light weight
and reduced distortion.
- 1" (throat diameter) JBL compression driver
with 1.75" titanium diaphragm and ferrofluid
cooling.
- Internally Bi-amplified – 130 watts low
frequency and 50 watts hi-frequency
(bi-amplified) – actual power delivered
to the drivers.
- Balanced, Mic/Line switchable, XLR input.
- Loop-through XLR output. “Daisy-chain”
additional EON speakers.
- 90° x 60° (nominal) constant directivity
horn.
- Thermomaster® Total Thermal Management
System®. A single piece, cast-aluminum baffle
integrates the woofer frame, horn, and
amplifier heat sink. Air movement in the
finned ports dissipates heat – no internal or
external cooling fans are required.
- Rugged, lightweight (47 lbs.), co-polymer
enclosure.
- Integral 35 mm pole mount receptacle with
securing thumbscrew.
- Multi-angle enclosure for front of house or
stage monitor application.
- Integral attachment points for optional JBL
and third-party mounting brackets.
Specifications
- Freq. Range (-10 dB): 47 Hz - 18 kHz
- Freq. Response (±3 dB): 65 Hz - 16 kHz
- Horz. Coverage (-6 dB): 90° Nominal
- Vert. Coverage (-6 dB): 60° Nominal
- Rated Maximum SPL: 127 dB, @ 1 m (3.3 ft)
- Dimensions (H x W x D): 686 mm x 430 mm x 444 mm
(27 in x 17 in x 17.5 in)
- Net Weight: 21 kg (47 lbs)
- LF Driver: Integral frame with 15" (380 mm) driver,
neodymium magnet, 2" Differential Drive
voice coil.
- HF Driver: JBL 2418H-1 1" (throat diameter) compression
driver with 1.75" diameter titanium diaphragm.
- Ferro-fluid cooled.
- Amplifier Power LF: 130 watts @ low-frequency driver impedance,
.1% THD.
- Amplifier Power HF: 50 watts @ high-frequency driver impedance,
<.1% THD.
- Input Sensitivity: -55 dBu to -2 dBu for rated output (Mic/Line
switch in MIC position)
+9 dBu to +26 dBu for rated output (Mic/Line
switch in LINE position)
- Enclosure Material: Aluminum baffle, gray co-polymer enclosure
and protective bezel
- Audio Connectors:
- Input XLR/F, balanced
- LoopOut XLR/M, balanced
- Crossover Freq.: 1.5 kHz.
- AC Input: Switchable 115 - 230 VAC (±10%), 50 - 60 Hz.,
175 watts rating per UL, detachable IEC (male)
power connector.
JBL continually engages in research related to product
improvement. New materials, production methods, and
design refinements are introduced into existing products
without notice as a routine expression of that philosophy.
For this reason, any current JBL product may differ in
some respect from its published description, but will
always equal or exceed the original design specifications
unless otherwise stated.
|
