JBL Speakers Product# JRX115

JBL Quality Design A sophisticated, advanced network topology design is utilized in JRX100 models to ensure quality performance. To minimize distortion due to coil saturation, heavy gauge wire is used for inductors and SonicGuard high-frequency driver protection guards against damage caused by inadvertent overpowering of the system. All full-range models feature Neutrik® Speakon and 1/4" input connectors. Constructed To Take A Beating All JRX100 series models are constructed of carpet-covered, 3/4" MDF - a material that is structurally and acoustically superior to the particleboard that is used by many competitive products. To ensure durability, JBL constructs these enclosures with advanced adhesives and closely mechanically spaced fasteners, while competitive systems typically rely on glue. Non-resonant, all metal handles are used and an 18 gauge, full metal grille protects the drivers. All JRX100 models have passed the same 100-hour, full rated-power torture test that JBL high-end touring systems must survive. Dual-Angle Pole Socket A new feature of the JRX100 line is the dual-angle pole socket. This feature allows the speaker to be mounted in either a conventional, vertical position, or with a 10 degree down angle. By aiming the speaker down, it is possible to achieve more even audience coverage and reduce the destructive acoustic reflections from walls. JRX115 The dual-angle pole socket is featured on two JRX100 models - the JRX115 and the JRX112M. The JRX115 is a 15" two-way front-of-house speaker with 1000 watts peak power capacity and 250 watts continuous. JBL JRX115 Features:   15" two-way portable speaker system 15" woofer 1" titanium diaphragm, fluid-cooled compression driver mounted on a Progressive Transition waveguide SonicGuard high-frequency protection Carpet-covered, trapezoidal enclosure 3/4" MDF construction 18-gauge steel grill 35 mm dualangle pole mount socket Steel handles Neutrik Speakon and 1/4" input