Audio Technica AT898CW Cardioid Lapel Microphone For Wireless System

Maximum intelligibility and clean, accurate reproduction for lecturers, stage and television talent, and houses of worship Low-profile design (a mere 5 mm in diameter) is ideal for applications requiring minimum visibility Operates on battery or phantom power Extensive array of provided accessories includes a clothing clip, viper clip, magnet clip and lanyard (black models only), windscreens, interchangeable single and double mic holders Accessories available separately 9.8 (3.0 m) cable permanently attached to mic, TA3F connector at power module

Also available as: AT898c -- less power module; 55" (1.4 m) cable, unterminated AT898cL4 -- less power module; 55" (1.4 m) cable terminated with Lemo connector for Sennheiser SK wireless systems AT898cT4 -- less power module; 55" (1.4 m) cable terminated with TA4F connector for Shure wireless systems AT898cT5 -- less power module; 55" (1.4 m) cable terminated with TA5F connector for ATW-U101 body-pack wireless system AT898cW -- less power module; 55" (1.4 m) cable terminated with locking 4-pin connector for A-T UniPak wireless systems

 

AT898 Specifications Element     Phantom Power Requirements Condenser

11-52V, 2 mA typical Polar Pattern    Battery Type Cardioid

1.5V AA/UM3 Frequency Response    Battery Current/Life 200 - 15,000 Hz 0.4 mA/1200 hours typical Open Circuit Sensitivity    Switch PHANTOM: -43 dB (7.0 mV) re 1V at 1 Pa BATTERY: -46 dB (5.0 mV) re 1V at 1 Pa Flat/Roll-off Impedance    Low Frequency Roll-off PHANTOM: 200 ohms BATTERY: 250 ohms 80 Hz, 12 dB per octave Maximum Input Sound Level    Weight PHANTOM: 131 dB SPL, 1 kHz at 1% T.H.D. BATTERY: 115 dB SPL, 1 kHz at 1% T.H.D. 0.03 oz (0.9 g) Signal to Noise Ratio    Power Module 63 dB, 1 kHz at 1 Pa In-line

Dynamic Range (Typical)    Output Connector PHANTOM: 100 dB, 1 kHz at Max. SPL BATTERY: 84 dB, 1 kHz at Max. SPL XLRM-type (power module) Accessories Furnished AT8537 power module AT8439 cable clip clothing clip base viper clip base magnet clip base with plate and lanyard three single mic holders two double mic holders two windscreens; battery protective case