- Maximum intelligibility and clean, accurate reproduction for lecturers, stage and television talent, and houses of worship
- Low-profile design (a mere 5 mm in diameter) is ideal for applications requiring minimum visibility
- Operates on battery or phantom power
- Extensive array of provided accessories includes a clothing clip, viper clip, magnet clip and lanyard (black models only), windscreens, interchangeable single and double mic holders
- Accessories available separately
- 9.8 (3.0 m) cable permanently attached to mic, TA3F connector at power module
- Also available as:
AT898c -- less power module; 55" (1.4 m) cable, unterminated
AT898cL4 -- less power module; 55" (1.4 m) cable terminated with Lemo connector for Sennheiser SK wireless systems
AT898cT4 -- less power module; 55" (1.4 m) cable terminated with TA4F connector for Shure wireless systems
AT898cT5 -- less power module; 55" (1.4 m) cable terminated with TA5F connector for ATW-U101 body-pack wireless system
AT898cW -- less power module; 55" (1.4 m) cable terminated with locking 4-pin connector for A-T UniPak wireless systems
| |
| |
| AT898 Specifications | | Element | | Phantom Power Requirements | | | Condenser
| | 11-52V, 2 mA typical
| | Polar Pattern | Battery Type | | | Cardioid
| | 1.5V AA/UM3
| | Frequency Response | Battery Current/Life | | | 200 - 15,000 Hz
| | 0.4 mA/1200 hours typical
| | Open Circuit Sensitivity | Switch | | | PHANTOM: -43 dB (7.0 mV) re 1V at 1 Pa
BATTERY: -46 dB (5.0 mV) re 1V at 1 Pa
| | Flat/Roll-off
| | Impedance | Low Frequency Roll-off | | | PHANTOM: 200 ohms
BATTERY: 250 ohms
| | 80 Hz, 12 dB per octave
| | Maximum Input Sound Level | Weight | | | PHANTOM: 131 dB SPL, 1 kHz at 1% T.H.D.
BATTERY: 115 dB SPL, 1 kHz at 1% T.H.D.
| | 0.03 oz (0.9 g)
| | Signal to Noise Ratio | Power Module | | | 63 dB, 1 kHz at 1 Pa
| | In-line
| | Dynamic Range (Typical) | Output Connector | | | PHANTOM: 100 dB, 1 kHz at Max. SPL
BATTERY: 84 dB, 1 kHz at Max. SPL
| | XLRM-type (power module)
| |
| Accessories Furnished: | AT8537 power module; AT8439 cable clip; clothing clip base; viper clip base; magnet clip base with plate and lanyard; three single mic holders; two double mic holders; two windscreens; battery; protective case | |
