Free Shipping

Friendliest Returns

No Sales Tax

Custom Gear

World Music Supply

Warehouse to the World

Audio Technica AE3300 Vocal Microphone

Pre-Order (Out / More On Order)

$279.00

custom block custom block

For a truly professional microphone that provides excellent sound and build quality with low handling noise, many vocalists look to the AE3300 from Audio-Technica. The AE3300 features the same element as the high-end AT4033 studio condenser microphone, but the rest of it is all built specifically for live use. The goal is to bring a clean, studio sounding vocal to the stage and the AT3300 hits it right on the money.

Features:

  • Exceptional performance for exceptional performers
  • Same element as the classic AT4033 studio microphone
  • Well-tempered polar pattern with outstanding rejection qualities
  • Superior anti-shock engineering ensures low handling noise and quiet performance
  • High-quality double-sided PCB uses surface-mount components. Extensive grounding plane and attention to best-practice grounding methods minimize electrical noise
  • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
  • Multi-stage grille design offers excellent protection against plosives and sibilance without compromising high-frequency clarity
  • Robust all-metal design for enduring dependability on the road
  • Quiet-Flex™ stand clamp provides silent, flexible microphone positioning
  • Integral 80 Hz HPF switch and 10 dB pad

Specifications:

  • ELEMENT Fixed-charge back plate, permanently polarized condenser
  • POLAR PATTERN Cardioid
  • FREQUENCY RESPONSE 30-18,000 Hz
  • LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave
  • OPEN CIRCUIT SENSITIVITY -42 dB (7.9 mV) re 1V at 1 Pa
  • IMPEDANCE 150 ohms
  • MAXIMUM INPUT SOUND LEVEL
    • 147 dB SPL, 1 kHz at 1% T.H.D.;
    • 157 dB SPL, with 10 dB pad (nominal)
  • NOISE 19 dB SPL
  •  
  • DYNAMIC RANGE (typical) 128 dB, 1 kHz at Max SPL SIGNAL-TO-NOISE RATIO 75 dB, 1 kHz at 1 Pa
  • PHANTOM POWER REQUIREMENTS 11-52V DC, 3 mA typical
  • SWITCHES
    • High-pass filter;
    • 10 dB pad (nominal)
  • WEIGHT 10.6 oz (300 g)
  • DIMENSIONS
    • 7.05" (179.0 mm) long,
    • 1.97" (50.0 mm) head diameter,
    • 1.30" to 0.87" (33.0 mm to 22.0 mm) tapered body diameter
  • OUTPUT CONNECTOR Integral 3-pin XLRM-type
  • ACCESSORIES FURNISHED:
    • AT8470 Quiet-Flex™ stand clamp for 5/8"-27 threaded stands
    • 5/8"-27 to 3/8"-16 threaded adapter
    • soft protective pouch

Write a review

Please login or register to review